|
Stage |
Key Stage |
Subjects |
Title |
|
Level 3 |
KS5 |
Engineering Diploma, BTEC, A level Systems and Control |
Using Run Data from BLOODHOUND SSC test with EJ200 in full reheat for 10 seconds |
Data from Sensor 011 located in the ECU capsule for the Auxiliary Power Unit has shown that the ECU may get close to its maximum design temperature on this run. It is situated on the left side of the EJ 200 casing with other Control Systems.
Design a system that will cool the ECU capsule to prevent shutdown in operation. You may use any PIC design program but you must clearly demonstrate how the system will operate.
Downloads:
Bloodhound_LEVEL_3_ENG_DIP_UNIT_4_-_Using_Run_Data (Word version - 575 kb)
